Holman 40391 - Preparation and Safety Information; Important Safety Warnings; Tools Required for Installation; Before You Begin Instructions

Instructions – 40391
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 1
PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO
ASSEMBLING, INSTALLING, AND USING THIS PRODUCT.
Warning
Always check for wires, fuel tanks and lines, brake lines and other important
vehicle functionality items prior to drilling and installing all products.
Tools Needed
7/16” Socket and Wrench
Phillips Driver
5/16” Drill Bit
Drill
5/16” Driver Bit
Table of Contents
Before You Begin ................................................................................................................................. 1
Parts ..................................................................................................................................................... 2
Hardware .............................................................................................................................................. 2
Step 1A – Install to Steel Shelf ............................................................................................................ 3
Step 1B – Install to Aluminum DCU Shelf ........................................................................................... 4
Step 2 – Optional - Install Second Kargo Case .................................................................................. 5
Before You Begin
 Read all instructions prior to assembling or installing any Holman product.
 Always locate your installation locations prior to performing any work.
 Have partition installed or shelf unit assembled prior to installing Kargo Case holder.