Holman WS5019 - Programming - Daily Alarm Setup

9
Programming - Manual Time Setup - Cont.
Programming - Daily Alarm Setup
• The 12/24 hour is ashing Use “+ “ or “- “ to select. Press “MODE “ to conrm.
• The display for the hour is ashing. Use “+ “ or “- “ to select the hour. Press “MODE “ to conrm.
• The display for the minutes is ashing. Use “+ “ or “- “ to select the minutes. Press “MODE “ to conrm.
• The country/city is ashing. Use “+ “ or “- “ to select the city of sunrise/sunset moonrise/moonset.
Press “MODE “ to conrm.
Information:
• The clock automatically changes from set-up mode to time display mode if no keys are pressed
for 20 seconds.
• Press “MODE” to switch from time display to A1 display.
• Press and hold the key “MODE” for 3 seconds, the ashing alarm time is shown.
• The hour display of the alarm time will ash. Use “+“ or “-“ to select hour. Press “MODE “ to conrm.
• Then follow with the minutes. Use “+“ or “-“ to select the minutes. Press “MODE “ to conrm.
• Then press “MODE” to switch from A1 display to A2 display. (The setting is the same as for A1)
• A1 is for Monday to Friday and A2 is for Saturday and Sunday.
Daily alarm on/off
• When showing A1 alarm time, press “+“ to activate the alarm 1 with alarm symbol showing.
• Press “+” again to cancel the alarm.
• When showing A2 alarm time, press “+“ to activate the alarm 2 with alarm symbol showing.
• Press “+” again cancel the alarm .
Information:
• The clock automatically changes from set-up mode to time mode if no keys are pressed for 20 seconds .
• Press any key to turn off alarm when beeping. (The alarm sounds for 2 minutes if no key is pressed to stop it)
WS5019 Weather Forecaster.indd 11 25/07/13 10:24 AM