Holmatro FTW 1800 BU - User Manual

101 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

/i

HTW

FTW

HTT

Handleiding NL

Manual EN

Mode d’emploi FR

Betriebsanleitung DE

Manual ES

Manual PT

Table of Contents

Questions and Answers

A
Abigail TorresAug 9, 2025
Why do Holmatro Water Pump couplers not connect or disconnect?
- L
  Laurie WolfeAug 9, 2025
  The Holmatro Water Pump couplers might not connect or disconnect due to several reasons: * The couplers are dirty: Clean the couplers. * Pressure in tool/hose: Use the pressure relief tool to release the pressure. * Faulty female coupler: Have it repaired by a Holmatro Certified Technician. * Misaligned couplers (connecting): Position both couplers properly in line with each other and press them together in one smooth action. * Misaligned couplers (disconnecting): Support and guide the male coupler when disconnecting. * Blocked snap ring: Check the snap ring of the female coupler and clean it.
A
Aaron MillerAug 15, 2025
What to do if my Holmatro FTW 1800 BU tool is not operating?
- V
  Virginia GriffinAug 15, 2025
  If your Holmatro Water Pump tool isn't operating correctly, consider these potential causes: * Couplers not connected properly: Disconnect and reconnect the coupler(s). * Pressure relief valve issue: Set the pressure relief valve on the pump to the operation position. * Pump not level: Place the pump horizontally. * Low oil level: Bring the oil level back to the correct level, after setting all tools in the output position. * Oil foaming: Vent the oil tank. * Excessive load: Do not load a tool more than the maximum allowed. * Seized plunger: Have it repaired by a Holmatro Certified Technician.
M
Megan BautistaAug 21, 2025
Why do Holmatro FTW 1800 BU Water Pump couplers not stay connected?
- J
  Justin FrazierAug 21, 2025
  The Holmatro Water Pump couplers may not stay connected because: * The external ring jams during connecting: Hold the hose at the bending restriction during connecting. * The locking mechanism in the female coupler does not work: Clean the female coupler with clean running water, dry it and treat the inside of the external ring with preservative oil, place and remove the dust cap repeatedly until the external ring springs back. * The female coupler is faulty: Have it repaired by a Holmatro Certified Technician.
L
lisa61Aug 27, 2025
What to do if Holmatro Water Pump leaks oil?
- M
  Megan WatersAug 27, 2025
  If your Holmatro Water Pump is leaking oil, it could be due to: * Too much oil in the oil tank: Bring the oil level back to the correct level, after setting all tools in the output position. * Couplers not connected correctly: Tighten loose couplers.
A
Allison MorganSep 1, 2025
How to stop Holmatro FTW 1800 BU Water Pump from leaking oil from the tank vent during transport?
- J
  John ClarkSep 1, 2025
  To prevent your Holmatro Water Pump from leaking oil from the tank vent during transport, ensure that the air vent on the tank is closed. Close the air vent on the tank.

Summary

Safety Regulations

Explanation of Symbols

General Safety Regulations

Core safety rules for using Holmatro equipment.

Personal Safety

Mandatory personal protective equipment (PPE) requirements.

Equipment Safety

Safety precautions specific to the equipment itself.

System Operation Safety

Safety rules for operating the complete hydraulic system.

Maintenance Safety

Safety guidelines for performing maintenance tasks.

Preparation for First Use

Operation

System Operation

How the hydraulic system functions during use.

CORE Couplers

Dual-hose Couplers

Pressure Relief Valve Handle

Connect Hydraulic Hoses

Procedure for connecting hydraulic hoses to the system.

Disconnect Hydraulic Hoses

Procedure for safely disconnecting hydraulic hoses.

Hoses with CORE Couplers

Hoses with Dual-hose Couplers

Relieve Pressure in Hoses;Tools

Method to release residual pressure in unconnected components.

Hose with CORE Couplers

Hoses with Dual Couplers

Use

General

Before Use

Pre-operation checks and readiness procedures.

During Use

Instructions for operating the pump during tasks.

After Use

Procedures to follow after completing the operation.

Shut Down and Disconnect

Inspection

Cleaning and Storage

Troubleshooting

Couplers Not Connecting;Disconnecting

Solutions for problems with coupler engagement.

Couplers Not Staying Connected

Solutions for issues with coupler locking mechanisms.

Tool Not Operating

Diagnosing and fixing issues where the tool is unresponsive.

Pump Leaks Oil

Troubleshooting causes and solutions for oil leaks.

Tank Vent Leaks Oil

Maintenance

Dangerous Substances

Maintenance Schedule

Recommended intervals for inspection and service.

Maintenance Activities

General

Hydraulic Couplers

Hydraulic Hoses

Hydraulic Oil

Oil Tank

Yearly Dealer Maintenance

Holmatro FTW 1800 BU Specifications

General

Brand	Holmatro
Model	FTW 1800 BU
Category	Water Pump
Language	English

Related product manuals

Holmatro FTW 1800 B

Holmatro HTW 1800 B

Holmatro PA 18 H2

Holmatro PA 38 H2

Holmatro PA 09 H2

Preview: Holmatro PA Series

Holmatro PA Series

Holmatro HTW 700 A

Holmatro HTS 550 A

Preview: Holmatro HTW Series

Holmatro HTW Series

Holmatro HTW 2200 A

Preview: Holmatro EHW 1650 RC

Holmatro EHW 1650 RC