Need help?Do you have a question about the Holzstar HBS Series and is the answer not in the manual?
General| Type | Band Saw |
|---|---|
| Blade Width | 13 mm |
| Blade Speed | 800 m/min |
| Table Tilt | 0° to +45° |
| Motor Power | 0.75 kW |
| Voltage | 230 V |
Essential safety rules for tool operation, including grounding and work area cleanliness.
Warnings against dangerous environments, improper apparel, and accidental starting.
Guidelines for safe material handling and blade usage during cuts.
Details user responsibilities for maintenance, parts, and warranty conditions.
Identifies and labels key parts of the bandsaw for user reference.
Instructions for attaching the working table to the bandsaw.
Steps for installing the rip fence assembly onto the table.
Guide for attaching the crank handles to the machine.
Procedure for ensuring the table is at a 90° angle to the blade.
Instructions on how to adjust the table to a desired angle.
Steps for aligning the saw blade for proper tracking.
Guide for setting the correct tension on the saw blade.
Steps for properly positioning and adjusting upper and lower blade guides.
Procedure for aligning the rip fence scale with the blade.
Instructions for raising or lowering the guide post for desired cutting height.
Instructions for adjusting the saw's blade speed settings.
Step-by-step guide for safely removing and installing a new saw blade.
Guidance on proper bandsaw operation for cutting wood.
Essential maintenance procedures to keep the bandsaw in good condition.
Schematic diagrams for the bandsaw's electrical connections.
Identifies common issues and provides solutions for bandsaw problems.
Visual representation of all bandsaw components with numerical labels.
Detailed list of all parts with corresponding part numbers and descriptions.
Information regarding warranty terms and conditions for product defects.
Manufacturer details, contact information, and operating instructions data.
To Next Page
