HOMCOM 800-154V70 - User Manual

Questions and Answers

V
Veronica JonesAug 7, 2025
Why do ice cubes stick together in my HOMCOM 800-154V70 Ice Maker?
- K
  Kevin PhillipsAug 7, 2025
  If your HOMCOM Ice Maker is producing ice, but the cubes are sticking together, it could be due to two reasons. First, the ice-making cycle might be too long; in this case, stop the ice maker and restart it after the ice blocks melt, and select the small ice cube size. Second, the water temperature in the inner tank might be too low; if so, replace the water, ensuring it's between 40?-90?.
J
James WilliamsAug 14, 2025
What to do if HOMCOM 800-154V70 cycle is normal but no ice formed?
- L
  Logan CarterSep 12, 2025
  If your HOMCOM Ice Maker completes the ice-making cycle normally but doesn't produce ice, several factors could be at play. The room temperature should be between 10-43?(50-105?), and the water temperature should be 8-32? (40?-90?). Alternatively, the refrigerant in the cooling system may be leaking, or a pipe in the cooling system may be blocked; in these cases, have a qualified technician verify.
C
Christopher EdwardsAug 22, 2025
What to do if the “ICE FULL” indicator is on for HOMCOM 800-154V70?
- D
  Debra WalkerAug 22, 2025
  If the "ICE FULL" indicator is illuminated on your HOMCOM Ice Maker, it means the ice basket is full. To resolve this, remove the ice from the basket. If needed, you can make ice for 10 more cycles, even with the indicator on, by pressing and holding the "on/off" button for 5 seconds.
S
susanboltonAug 29, 2025
Why is the “ADD WATER” indicator on my HOMCOM 800-154V70 Ice Maker?
- A
  Angela SpencerAug 29, 2025
  If the “ADD WATER” indicator lights up on your HOMCOM Ice Maker, it signifies a lack of water. To fix this, stop the ice maker, add water to the unit, and then press the “ON/OFF” button again to restart.

Summary

IMPORTANT SAFETY INSTRUCTIONS

Safety Alert Symbols and Warning Definitions

Explains safety alert symbols and defines "DANGER" and "WARNING" for hazard communication.

PREPARING YOUR ICE MAKER FOR USE

Electrical and Usage Precautions

Covers safe handling of cords, outlets, operation near children, and environmental placement.

GETTING TO KNOW YOUR UNIT

Unit Components and Features

Identifies key parts of the ice maker, including the scoop, sensors, basket, and controls.

OPERATING PROCEDURES & MAINTENANCE

Control Panel Overview and Functions

Details the control panel buttons, power indicator, ice full, and water shortage indicators.

Automatic self-cleaning program

UNPACKING YOUR ICE MAKER

Unpacking and Initial Checks

Guides through removing packaging, checking contents, and initial placement advice.

ASSEMBLE HANDLE

CONNECTING YOUR ICE MAKER

Electrical Connection Safety

Emphasizes proper grounding and safe electrical connection to prevent shock.

CLEANING AND MAINTAINING YOUR ICE MAKER

Cleaning Procedures

Outlines steps for thoroughly cleaning the interior and exterior of the ice maker.

USING YOUR ICE MAKER

Ice Making Cycle and Operation

Explains how to start the ice making cycle, water levels, and indicators.

TROUBLESHOOTING

TECHNINCAL PARAMETERS & CIRCUIT DIAGRAM

Technical Specifications

Lists key technical data such as model, power, dimensions, and refrigerant.

EXPLOSIVE DRAWINGS

Parts Identification and List

Details the components of the ice maker with an exploded view and a comprehensive parts list.