EasyManua.ls Logo

HOMCOM 800-157V90 - User Manual

HOMCOM 800-157V90
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
IN221100192V01_UK
800-157V90
Portable Household Ice Maker
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Question and Answer IconNeed help?

Do you have a question about the HOMCOM 800-157V90 and is the answer not in the manual?

Overview

This document is a user manual for a portable household ice maker, model WBJ-15B, distributed by Homcom. It provides instructions and information in multiple languages, including English, French, German, Italian, Spanish, and Portuguese.

Function Description:

The Homcom portable household ice maker is designed to produce ice cubes for domestic use. It operates by freezing water into ice cubes, which are then stored in an internal basket. The machine features an automatic shut-off function when the ice basket is full or when water levels are low. It is not intended to be used as a freezer but can temporarily store ice.

Important Technical Specifications:

  • Model: WBJ-15B
  • Applicable Climate Types: SN/N/ST/T
  • Grade of Protection against Electric Shock: I
  • Ice Storage Capacity: 0.8kg
  • Water Tank Volume: 2.1L
  • Rated Voltage/Frequency: 220-240V~/50Hz
  • Rated Current: 0.8A
  • Refrigerant/Weight: R600a/28g
  • Type of Thermal Insulation: C5H10
  • Net Weight: 8.6kg
  • Product Size: W25.5D37.5H31.2cm

Usage Features:

  • Control Panel: The ice maker features a control panel with four indicators and a power button.
    • ICE-MAKING: Indicates when the machine is producing ice.
    • ADD WATER: Illuminates (red) when the water level is insufficient, and the machine stops operating. Pressing the power button after adding water restarts the machine.
    • ICE FULL: Illuminates (red) when the ice basket is full, and the machine automatically enters standby mode.
    • POWER: The main power button.
  • First Use/Long Periods of Inactivity: For initial use or after extended storage, it is recommended to discard the ice cubes produced during the first four cycles to ensure the machine is thoroughly cleaned.
  • Installation: Before connecting the power cord, the machine should be placed vertically for 24 hours to allow the refrigerant to settle. It should be placed on a stable, level surface in a well-ventilated area with temperatures between 10-37°C (50-100°F). It should not be installed in closed rooms or near heat sources, and should be kept away from wind, rain, water mist, and electromagnetic environments.
  • Water Type: Only filtered or purified water should be used.
  • Error Indicators: If an error occurs, the 'ice full' and 'add water' indicators will flash simultaneously, and the ice maker will stop working. Troubleshooting steps are provided in the manual.
  • Sounds during Operation: The manual notes that various sounds during operation are normal, including those from the compressor, water splashing, refrigerant gurgling, and ice falling into the box.
  • Storage: When not in use for long periods, the machine should be turned off, unplugged, and all water drained. The interior should be dried with a soft, clean cloth.
  • Safety Warnings:
    • Do not plug/unplug with wet hands.
    • Do not attempt to repair or replace parts unless advised by the manufacturer.
    • Maintain at least six inches of space around all sides for proper air circulation.
    • Do not use mechanical equipment or other means to accelerate defrosting.
    • Do not damage the refrigeration tube.
    • Do not clean with flammable liquids or store explosives in the appliance.
    • Do not incline the machine more than 45 degrees.
    • Do not touch the evaporator by hand when the machine is working.

Maintenance Features:

  • Regular Cleaning: Regular cleaning and maintenance are crucial for optimal performance.
  • Cleaning Procedure:
    • Turn off and unplug the machine before cleaning.
    • Do not use solvent-based cleaning agents.
    • Do not wash the machine; wipe the exterior with a damp cloth.
    • Regularly check the drain plug for tightness to prevent leaks.
    • For thorough cleaning (after first use or long periods of inactivity), use a disinfection solution of water and vinegar or citric acid (10:1 ratio).
    • Wipe the inside, including the evaporator (icing column), with the solution.
    • Add ice-making water, run the machine, and discard the ice cubes produced four times. Then, remove remaining water from the drain and reinstall the plug.
    • Use a clean, soft cloth to remove any remaining watermarks.
  • Addressing Strange Smells: If the ice has an unusual taste or odor, follow the thorough cleaning steps outlined above.
  • External Cleaning: For external cleaning and dust removal from the bottom, use citric acid every two weeks.

The manual also includes a detailed troubleshooting table for various issues, such as the machine not turning on, 'add water' indicator lit, 'ice full' indicator lit, ice cubes stuck, small ice cubes produced, and the machine working but not producing ice. It provides potential causes and corresponding solutions for each problem. Contact information for customer support is also provided.

HOMCOM 800-157V90 Specifications

General IconGeneral
BrandHOMCOM
Model800-157V90
CategoryIce Maker
LanguageEnglish

Related product manuals