8
the time indicator (on the lower left of the display) will always be on. Cancel the selection
by holding for two seconds. The appliance will enter standby.
Key 5 & Key 6 – Controls time and temperature for the left pot. You can increase or
decrease the temperature by 5℃ ( between 80-200℃). Holding the key down will rapidly
change the temperature. Also use these keys to increase or decrease the cooking time by
one minute (between 1-60 minutes). Holding the key down will change the time rapidly.
Key 7 & Key 8 – Controls time and temperature for the right pot. You can increase
or decrease the temperature by 5℃ ( between 80-200℃). Holding the key down will
rapidly change the temperature. Also use these keys to increase or decrease the cooking
time by one minute (between 1-60 minutes). Holding the key down will change the time
rapidly.
Key 9 – Preheat Key icon.
Press , then select or . Press again to start the appliance. Preheat default
settings: Temperature: 160℃.Timer: 3 minutes.
Key 10 – Synchronisation end key
Press – two recipes with different times can be ended at the same time.
Key 11 – The temperature
Key 12 – The time
Indicator light “13 ” Nixie tube for the left pot
Indicator light “14 ” Temperature light for the left pot
Indicator light “15 ” Timer light for the left pot
Indicator light “16 ” Temperature unit indicator light for the left pot
Indicator light “17 ”Time unit indicator light for the left pot
Indicator light “18 ” Nixie tube for the right pot
Indicator light “19 ” Temperature light for the right pot
Indicator light “20 ” Timer light for the right pot
Indicator light “21 ” Temperature unit indicator light for the right pot
Indicator light “22 ”Time unit indicator light for the right pot
Indicator light “ 23-30 ” Recipe indicator
Detailed instructions
1.Boot mode
Ensure the pan is correctly in the machine by plugging in the appliance. The machine will
power on and beep once – all icons will illuminate for one second, then turn off. The power
icon will stay lit.
2.Standby Mode
Press the power icon – Pot and will stay lit and the appliance will be on standby.
If on standby for five minutes without being used, the unit will go into boot mode.
3. Single pot working mode
3.1. Press or , then choose a function – the menu will stay lit. The default menu is
Steak, which will be flashing. The other indicators will stay lit, whilst the temperature and
To Next Page
