3
I. Attention Matters
Warning matters:
1. Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
2. The appliance shall be stored in a room without continuously operating ignition sources
(for example: open flames, an operating gas appliance or an operating electric heater.)
3. Do not pierce or burn.
4. Be aware that refrigerants may not contain an odour.
5. Appliance shall be installed, operated and stored in a room with a floor area larger than
2
14 m .
7. Keep any required ventilation openings clear of obstruction;
8. Servicing shall be performed only as recommended by the manufacturer.
9. The appliance shall be stored in a well-ventilated area where the room size
corresponds to the room area as specified for operation.
10. Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorises their competence to handle refrigerants safely in
accordance with an industry recognised assessment specification.
11. Servicing shall only be performed as recommended by the equipment manufacturer.
Maintenance and repair requiring the assistance of other skilled personnel shall be
carried out under the supervision of the person competent in the use of flammable
refrigerants.
12. All working procedure that affects safety means shall only be carried by competent
persons.
Notes:
* The air conditioning is only suitable for indoor use, and is not suitable for other
applications.
* Follow local grid interconnection rules while installing the air conditioning and ensure
that it is properly grounded. If you have any question on electrical installation, follow the
instructions of the manufacturer, and if necessary, ask a professional electrician to
install it.
* Place the machine in a flat and dry place and keep a distance of above 50cm between
the machine and the surrounding objects or walls.
* After the air conditioning is installed, ensure that the power plug is intact and firmly
plugged into the power outlet, and place the power cord orderly to prevent someone
from being tripped or pulling out the plug.
* Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet
and outlet free from obstructions.
* When drainage pipes are installed, ensure that the drainage pipes are properly
connected, and are not distorted or bended.
* While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with
hands gently to avoid damaging wind-guide strips.
To Next Page
Loading...
Need help?
General
