8
Instructions of key operation of the high-quality remote control are as follows:
1. Power: Press the key to turn on or turn off the machine.
2. Mode: press the key to switch between cooling, fan, and dehumidification
mode.
3. Up: press the key to increase temperature and timing set value.
4. Down: press the key to reduce temperature and timing set value.
5. Fan: press the key to select high, medium and low wind speed output
circularly.
6. Timer: press the key to set timing value. Timing value can be set with 1-24
hours and the timing value is adjusted upwards or downwards by one hour.
7. Swing: Press the louver will swing up and down.
8. press the key to switch between Celsius and Fahrenheit.
9. Sleep Mode: Press the key to turn on the sleep mode.
IV. Protection function
3.1 Frost Protection Function:
In cooling mode, if the temperature of the exhaust pipe is too low, the machine will
automatically enter protection status; if the temperature of the exhaust pipe rises to a
certain temperature, it can automatically revert to normal operation.
To Next Page
Loading...
Need help?
General
