Home Decorators Collection JUNEDALE

Questions and Answers

D
David BrownJul 29, 2025
What to do if my Home Decorators Collection JUNEDALE Fan will not start?
- R
  russelladamJul 29, 2025
  If your Home Decorators Collection Fan doesn't start, begin by checking the main and branch circuit fuses or breakers. Then, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Also, verify the battery in the remote control and ensure you are within the normal operating range of 10-20 feet. Before checking the dip switch settings, remember to turn off the power supply.
T
Tiffany HarmonAug 6, 2025
Why is my Home Decorators Collection JUNEDALE Fan so noisy?
- R
  Ronald WalkerAug 6, 2025
  If your Home Decorators Collection Fan is noisy, make sure all motor housing screws are snug and that the screws attaching the fan blade bracket to the motor hub are tight. Check that the wire nut connections are not rattling against each other or the interior wall of the switch housing. Allow a 24-hour “breaking in” period, as most noises disappear during this time. If you're using a light kit, ensure the screws securing the glassware are tight and the light bulbs are secure. Also, ensure the canopy is a short distance from the ceiling, without touching it, and that your outlet box is secure, with rubber isolator pads used between the mounting plate and outlet box.
M
Mark MartinAug 16, 2025
How to fix a wobbling Home Decorators Collection JUNEDALE Fan?
- J
  Jennifer ColeAug 17, 2025
  If your Home Decorators Collection Fan wobbles, first check that all blade and blade arm screws are secure. Unequal blade levels often cause wobble, so measure from a point on the ceiling to each blade tip, ensuring any deviation is within 1/8 inch. Run the fan for ten minutes; if wobbling continues, contact Customer Service for a free balancing kit.

Summary

Safety Information

General Safety Warnings

Important safety precautions and warnings to prevent injury or electric shock.

Pre-Installation

Specifications

Technical specifications of the ceiling fan, including size, speed, and airflow.

Tools Required

List of tools necessary for the installation of the ceiling fan.

Hardware Included

Details of hardware components provided with the ceiling fan for assembly.

Package Contents

List of all parts and components included in the fan's packaging.

Installation

Mounting Options

Various methods and considerations for securely mounting the ceiling fan.

Assembly - Blade Installation

Attaching the Blade Support Plate

Steps for attaching the blade support plate to the fan blades.

Installing the Blades

Instructions for attaching the fan blades to the motor assembly.

Assembly - Standard Ceiling Mount

Preparing for Mounting

Steps to prepare the fan and mounting bracket for ceiling installation.

Routing the Wires

Guide for properly routing electrical wires through the fan components.

Assembling the Fan

Steps for assembling the main fan components onto the mounting bracket.

Assembly - Hanging the Fan

Attaching the Fan to the Electrical Box

How to securely attach the fan assembly to the electrical outlet box.

Hanging the Fan

Instructions for lifting and seating the fan onto the mounting bracket.

Preparing the Remote Control

Steps for setting up the remote control, including battery and dip switches.

Installing the Receiver

Placement and installation of the fan's receiver unit.

Wiring the Receiver to Household Wiring

Connecting the fan receiver to the home's electrical wiring.

Wiring the Fan to the Receiver

Connecting the fan's wiring to the installed receiver unit.

Mounting the Fan-Motor Assembly (Standard Mount)

Final steps to mount the fan motor assembly securely to the ceiling bracket.

Assembly - Attaching the Light Kit

Installing the Light Kit Pan

How to attach the light kit pan to the fan motor assembly.

Attaching the Light Kit Fitter Assembly

Connecting the light kit fitter assembly and its wiring.

Installing the Shade

Instructions for attaching the light shade to the light kit.

Assembly - Attaching the Accessories

Mounting the Remote Control Holder

Steps for installing the bracket to hold the remote control.

Operating Your Fan and Remote Control

Fan and Remote Control Operations

Explains how to operate the fan speed, light, and color temperature using the remote.

Care and Cleaning

Maintenance and Cleaning Instructions

Guidelines for regular cleaning and maintenance of the ceiling fan.

Troubleshooting

Common Problems and Solutions

Identifies common issues and provides solutions for fan operation.

This document is a user and care guide for the Junedale 52-inch ceiling fan, manufactured by Home Decorators Collection. The fan is identified by Item #1005 805 992, Model #52188, and UL Model #52-JUNE.

Function Description:

The Junedale 52-inch ceiling fan is designed to provide air circulation and illumination for residential spaces. It features a reversible motor for both warm and cool weather operation. In warm weather (forward mode), the fan creates a downward airflow for a cooling effect, allowing the air conditioner to be set at a higher temperature. In cool weather (reverse mode), an upward airflow moves warm air off the ceiling, enabling the heating unit to be set at a lower temperature. The fan includes a light kit with adjustable correlated color temperature (CCT) options. It is operated via a remote control, which allows for power on/off, fan speed adjustment, light on/off/dimming, and CCT changing.

Important Technical Specifications:

Size: 52 inches
Voltage: 120V
Fan Power Consumption (without lights):
- Low: 13 W
- Medium: 32 W
- High: 62 W
Airflow (CFM):
- Low: 2559 CFM
- Medium: 4071 CFM
- High: 5521 CFM
Airflow Efficiency (CFM/WATT):
- Low: 196 CFM/WATT
- Medium: 127 CFM/WATT
- High: 89 CFM/WATT
Net Weight: 17.2 lbs (7.8 kg)
Gross Weight: 22.71 lbs (10.3 kg)
Cubic Feet: 1.65 cu. ft.
Mounting: Designed for UL-listed outlet boxes marked "Acceptable for fan support of 35 lbs (15.9 kg) or less."
Clearance: Minimum of 7 ft. (2.1 m) from the trailing edge of the blades to the floor.
Sloped Ceiling Installation: Maximum angle allowable is 20° away from horizontal.
Control: Remote control with preset frequencies.
Light Kit: Features adjustable Correlated Color Temperature (CCT) with six options: 2700K (Warm White), 3000K (Soft White - default), 3500K (Neutral White), 4000K (Cool White), 5000K (Daylight), and 6500K (Cool Daylight).
Safety Features: Equipped with a safety tab (FF) to prevent the fan from falling if the setscrew loosens. Must be installed with an isolating wall switch.
Electrical Requirements: 110/120 volts, 60Hz.

Usage Features:

Remote Control Operation:
- Power On/Off: Single button press to turn the fan and light on or off.
- Fan Speed:
  - 1 press: High speed
  - 2 presses: Medium speed
  - 3 presses: Low speed
  - 4 presses: Fan off
- Light On/Off/Dimming: Press to turn light on/off, press and hold to activate dimmer function.
- CCT Changing: Push and release button to cycle through six color temperature options.
Reversible Motor: Allows for seasonal adjustment of airflow direction. The reversing switch is located on the top of the motor housing.
Damp Location Suitable: The fan is suitable for use in damp locations.
Installation Options: Can be mounted to an existing UL-listed outlet box. For steep, sloped ceilings, a longer downrod may be needed to maintain proper blade clearance. An installation hanger bar may be required if there is no ceiling joist.
Pre-set Frequencies: Receiver and hand unit frequencies are factory preset, but dip switches can be adjusted if needed.

Maintenance Features:

Regular Checks: Support connections, brackets, and blade attachments should be checked and retightened twice a year.
Cleaning:
- Ensure power is off before cleaning.
- Use a soft brush or lint-free cloth to avoid scratching the finish.
- Do not use water for cleaning to prevent damage to the motor or electrical shock.
- A light coat of furniture polish can be applied to wood parts for protection and beauty.
- Small scratches can be covered with shoe polish.
Lubrication: The motor has permanently-lubricated sealed ball bearings and does not require oiling.
Troubleshooting Guide: Provides solutions for common issues such as the fan not starting, noisy operation, and wobbling.
- Fan Not Starting: Check fuses/breakers, remote control battery, wire connections, and dip switch settings.
- Noisy Fan: Ensure motor housing screws, blade bracket screws, and wire nut connections are snug. Allow a 24-hour "breaking in" period. Check light kit screws and light bulbs if applicable.
- Fan Wobbles: Ensure all blade and blade arm screws are secure. Check blade levels for equality (deviation should be within 1/8 inch). A balancing kit can be sent if wobbling persists after 10 minutes of operation.
Battery Replacement: The remote control battery (23A 12V) should be replaced when it weakens to prevent leakage and damage to the remote control. Dispose of used batteries properly.

Warranty Information:

Fan Motor: Lifetime warranty against defects in workmanship and material.
Light Kit (excluding glass): Five-year warranty against defects in workmanship and material.
Other Fan Parts (excluding glass or acrylic blades): Two-year warranty against defects in workmanship and material.
Warranty Service: Requires proof of purchase (receipt). Costs for removing and reinstalling the product are the customer's responsibility.
Exclusions: Damage due to accident, misuse, improper installation, or affixing accessories is not covered. Changes in brass finish (rusting, pitting, corroding, tarnishing, peeling) due to climatic conditions are not covered. "Wobble" within normal limits is not considered a defect. Servicing by unauthorized persons voids the warranty.
Disclaimer: Disclaims all implied warranties, including merchantability and fitness for a particular purpose, to the extent permitted by law. Some states may not allow limitations on implied warranties or exclusions of incidental/consequential damages.
Customer Service: Contact 1-800-986-3460 for warranty claims and assistance.