To Next PageTo Next Page
Need help?Do you have a question about the Homelite UT10918 and is the answer not in the manual?
Emphasizes reading the manual and knowing the tool for safe operation.
Explains kickback and how to reduce the risk through proper grip and avoiding tip contact.
Covers pre-start checks, appropriate clothing, footwear, gloves, and eye/hearing/head protection.
Details safe refueling procedures and highlights kickback as a dangerous reaction.
Explains the function of the choke lever, chain brake, guide bar, primer bulb, and throttle trigger.
Warns against familiarity leading to carelessness and the importance of safety gear.
Details the steps for starting a cold engine, including choke and primer use.
Details kickback prevention and emphasizes the importance of a proper two-handed grip.
Warns about hazardous conditions like wind, precipitation, and tree integrity during felling.
Addresses bucking logs with stress, overbucking, and underbucking techniques.
Details how to mix gasoline and 2-cycle lubricant for the engine, including ratios.
Explains how to engage and reset the chain brake and when to seek service.
Outlines the procedure for starting a warm engine, differing slightly from cold start.
Guides on adjusting the idle speed screw to set proper idle RPM and stop chain movement.
Explains the correct stance and body positioning relative to the chain line for safety.
Outlines the proper procedure for felling trees, including notch cuts and safe retreat paths.
Warns about the dangers of springpoles and how to handle them safely.
Introduces the engine starting procedure and provides a critical safety warning.
Warns against the chain turning at idle and explains the kickback phenomenon.
Explains the back cut, hinge wood, and use of wedges in felling large trees.
Discusses lubrication requirements and the process for replacing the guide bar and chain.
Emphasizes safety precautions before installing the guide bar, chain, and clutch components.
Details the steps for removing the old chain and bar and installing a new one.
Addresses issues like no spark or a flooded engine and their solutions.
Emphasizes reading the manual and knowing the tool for safe operation.
Explains kickback and how to reduce the risk through proper grip and avoiding tip contact.
Covers pre-start checks, appropriate clothing, footwear, gloves, and eye/hearing/head protection.
Details safe refueling procedures and highlights kickback as a dangerous reaction.
Explains the function of the choke lever, chain brake, guide bar, primer bulb, and throttle trigger.
Warns against familiarity leading to carelessness and the importance of safety gear.
Details the steps for starting a cold engine, including choke and primer use.
Details kickback prevention and emphasizes the importance of a proper two-handed grip.
Warns about hazardous conditions like wind, precipitation, and tree integrity during felling.
Addresses bucking logs with stress, overbucking, and underbucking techniques.
Details how to mix gasoline and 2-cycle lubricant for the engine, including ratios.
Explains how to engage and reset the chain brake and when to seek service.
Outlines the procedure for starting a warm engine, differing slightly from cold start.
Guides on adjusting the idle speed screw to set proper idle RPM and stop chain movement.
Explains the correct stance and body positioning relative to the chain line for safety.
Outlines the proper procedure for felling trees, including notch cuts and safe retreat paths.
Warns about the dangers of springpoles and how to handle them safely.
Introduces the engine starting procedure and provides a critical safety warning.
Warns against the chain turning at idle and explains the kickback phenomenon.
Explains the back cut, hinge wood, and use of wedges in felling large trees.
Discusses lubrication requirements and the process for replacing the guide bar and chain.
Emphasizes safety precautions before installing the guide bar, chain, and clutch components.
Details the steps for removing the old chain and bar and installing a new one.
Addresses issues like no spark or a flooded engine and their solutions.
General