ASSEMBLY
OPERATION
Page 10
SETriNG
BLADE HEIGHT
See Figure
4.
When shipped,
the
wheels on
the
mower
are set
to
a
low-cutting position. Before using the mower for the first
time, raise the cutting position to the height best suited for
your lawn. The average lawn should be between
1-1/2 in.
to 2 in. during cool months and between 2 in. and
3-1/4 in.
during hot months.
To
adJust the blade height:
•
To
raise the blade height, grasp the height adjustment
lever and move it toward the back
of
the mower.
•
To
lower the blade height, grasp the height adjustment
lever and move it toward the front of
the
mower.
d
HEIGHT
ADJUSTMENT
LEVER
LOWEST
BLADE
SETTING
Fig.4
A WARNING:
Do not allow familiarity with this type of product to make you
careless. Rememberthat a careless fraction of a second is
sufficient to inflict serious injury.
A WARNING:
Always wear safety goggles
or
safety glasses with side
shields when operating this product. Failure to do so could
result
in
objects being thrown into your eyes, resultfng in
possible serious injury.
A WARNING:
Do not use any attachments
or
accessories not recom-
mended by the manufacturer
of
this product. The use of
attachments
or
accessories not recommended can result
in
serious personal injury.
APPLICATIONS
You
may usa this product for the purpose listed below:
Mowing your lawn
To Next Page
Loading...
Need help?
General
