31
Start-up
compartment (C). Pairing mode remains activat-
ed for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (B)
shortly (see figure 6).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.
• Please select, in which application (e.g. security
and/or light) you would like to use the device.
• Allocate the device to a room and give the device
a name.
• Insert the presence sensor into the installed
mounting plate.
To Next Page
Loading...
