EasyManua.ls Logo

Homestyles 5002-89 - User Manual

Homestyles 5002-89
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver
Bar Stool
5002-89
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
M6x50
Head Cap Bolt
4 pcs. (+1 extra)
M6x70
Head Cap Bolt (long)
4 pcs. (+1 extra)
M6x40
Head Cap Bolt (short)
3 pcs. (+1 extra)
Flat Washer
11 pcs. (+1 extra)
Spring Washer
11 pcs. (+1 extra)
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M3.5x40
Wood Screw
6 pcs. (+1 extra)
A.
Seat
1 pc.
C.
Leg
1 pc.
B.
Leg
1 pc.
E.
Side Stretcher
1 pc.
F.
Side Stretcher
1 pc.
G.
Front Stretcher
1 pc.
D.
Back Frame
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
servicedesk@homestylesfurniture.com,
888-680-7460
Question and Answer IconNeed help?

Do you have a question about the Homestyles 5002-89 and is the answer not in the manual?

Summary

Part List

Hardware List

Assembly Step 1

Assembly Step 2

Care Instructions

General Usage Precautions

Advises against liquids, direct sunlight, writing on surfaces, hot objects, rubber placemats, and commercial waxes/polishes.

Cleaning Instructions

Details cleaning the furniture with lukewarm soapy water and buffing with a dry cloth.

Overview

This document provides assembly instructions and care guidelines for the Homestyles 5002-89 Bar Stool.

Function Description:

The Homestyles 5002-89 Bar Stool is a piece of furniture designed for seating at a bar or counter height. It features a seat, four legs (two of type B and two of type C), side stretchers (E and F), a front stretcher (G), and a back frame (D) to provide support and stability. The assembly process involves connecting these components using various hardware pieces to form a complete and functional bar stool.

Important Technical Specifications:

  • Model Number: 5002-89
  • Product Type: Bar Stool
  • Assembly Tools Required: Phillips screwdriver, Hex Wrench (included), Small Hex Wrench (included).
  • Hardware Components (with quantities and extras):
    • Flat Washer: 11 pcs. (+1 extra)
    • Spring Washer: 11 pcs. (+1 extra)
    • M3.5x40 Wood Screw: 6 pcs. (+1 extra)
    • M6x40 Head Cap Bolt (short): 3 pcs. (+1 extra)
    • M6x50 Head Cap Bolt: 4 pcs. (+1 extra)
    • M6x70 Head Cap Bolt (long): 4 pcs. (+1 extra)
  • Power Tool Restriction: Do not use power tools above 8 volts for assembly to prevent cracking.

Usage Features:

  • Assembly Process: The assembly is divided into two main steps.
    • Step 1: Involves placing the Seat (A) upside down on a soft cloth. Legs (B) and (C) are attached to the Seat (A) using Flat Washers, Spring Washers, and Head Cap Bolts. These bolts should only be tightened halfway initially. The Front Stretcher (G) is then attached to the unit with Wood Screws. Finally, Side Stretcher (E) is attached to Leg (B) and Side Stretcher (F) to Leg (C) with Wood Screws.
    • Step 2: The Back Frame (D) is attached to the unit using Flat Washers, Spring Washers, Head Cap Bolts (short), and Head Cap Bolts (long). These bolts should also be tightened only halfway at this stage. After attaching the Back Frame, all bolts used in Steps 1 and 2 must be fully tightened. Lastly, Wood Screws are inserted into pre-drilled holes in the unit and tightened.
  • Important Assembly Guidelines:
    • Always use a soft cloth between parts and the floor to prevent scratches.
    • Do not fully tighten all bolts until each part is properly assembled. This allows for adjustments and ensures proper alignment.
    • Keep the Hex Wrench after assembly, as bolts may need to be tightened in the future due to normal use.
    • Carefully remove all parts from the carton and place them on a soft cloth to prevent damage.
    • Strictly follow assembly instructions to ensure the product is completed as designed.

Maintenance Features:

  • Cleaning: Clean the bar stool with a soft cloth moistened in lukewarm soap and water, then buff with a dry clean cloth.
  • General Care (NEVER):
    • Do not allow liquids to remain on the furniture, as absorption can cause parts to warp, split, and finishes to delaminate.
    • Do not use glass cleaners on finished furniture, as ammonia chemically attacks the finish.
    • Do not place the furniture in direct sunlight to prevent fading.
    • Do not write directly on the surface to prevent marking.
    • Do not place hot objects on the surface to prevent finish damage.
    • Do not use rubber-based placemats to prevent discoloring.
    • Do not use commercial waxes and polishes to prevent yellowing.
  • Replacement Parts: Homestyles provides free replacements for missing or damaged parts within 30 days of purchase. Digital images of defective parts may be required. If the product was not purchased from an authorized retailer, Homestyles is not obligated to provide replacement parts. Parts are not available for fully assembled items or for sale. Replacement requests can be made via Homestyles Customer Service.
  • Customer Service Contact Information:
    • Website: www.homestylesfurniture.com
    • Email: servicedesk@homestylesfurniture.com
    • Phone: 888-680-7460

Homestyles 5002-89 Specifications

General IconGeneral
BrandHomestyles
Model5002-89
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals