Homestyles Swivel Chair User Manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
20 06654 0053
Swivel Chair
IMPORTANT
A.
Back
1 pc.
C.
Base
1 pc.
B.
Connector
1 pc.
Wrench
1 pc.
Flat Washer
4 pcs. (+1 extra)
M8x35
Bolt
4 pcs. (+1 extra)
Spring Washer
4 pcs. (+1 extra)
Nut
4 pcs. (+1 extra)
Cap
12 pcs. (+1 extra)
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.

Homestyles Swivel Chair Specifications

General

Type	Swivel Chair
Category	Indoor Furnishing
Material	Fabric
Frame Material	Metal
Weight Capacity	250 lbs
Swivel	Yes
Seat Height	18 inches
Assembly Required	Yes

Summary

Product Parts and Hardware

Chair Components

Lists the main parts of the swivel chair: Back, Connector, and Base.

Assembly Hardware

Details all hardware components required for assembly, including bolts, washers, nuts, and caps.

Assembly Instructions

Step 1: Attach Seat to Connector

Instructions for attaching the seat to the connector using bolts, washers, and nuts.

Step 2: Place Unit onto Base

Instructions for placing the assembled chair unit onto the base component.

Care and Maintenance

General Care Warnings

Precautions against liquids, glass cleaners, power tools, direct sunlight, writing, hot objects, and placemats.

Cleaning Instructions

Guidance on how to clean the furniture using a soft cloth and mild soap.