EasyManua.ls Logo

Homestyles 6661-53 - User Manual

Homestyles 6661-53
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Hardware List
E.
Base
1 pc.
F.
Connector
1 pc.
6661-53
Swivel Arm Chair
IMPORTANT
Spring Washer (large)
6 pcs. (+1 extra)
Nut
4 pcs. (+1 extra)
Cap
8 pcs. (+1 extra)
Spring Washer
4 pcs. (+1 extra)
Flat Washer
4 pcs. (+1 extra)
Flat Washer (large)
2 pcs. (+1 extra)
M8x35
Bolt
4 pcs. (+1 extra)
Flat Washer (large)
4 pcs. (+1 extra)
Wrench
1 pc.
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
C.
Arm
1 pc.
D.
Arm
1 pc.
Part List
A.
Back
1 pc.
B.
Seat
1 pc.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x15
Head Cap Bolt (short)
4 pcs. (+1 extra)
M8x30
Head Cap Bolt (long)
2 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
servicedesk@homestylesfurniture.com,
888-680-7460
Question and Answer IconNeed help?

Do you have a question about the Homestyles 6661-53 and is the answer not in the manual?

Summary

Product Parts Identification

Part A: Back

Identifies the back component of the swivel arm chair.

Part B: Seat

Identifies the seat component of the swivel arm chair.

Part C: Arm

Identifies the left arm component of the swivel arm chair.

Part D: Arm

Identifies the right arm component of the swivel arm chair.

Part E: Base

Identifies the base component of the swivel arm chair.

Part F: Connector

Identifies the connector piece for the chair assembly.

Hardware and Tools List

Included Hardware

Lists all bolts, nuts, washers, and caps required for assembly, including quantities and extras.

Included Tools

Lists the wrench and hex wrenches provided for assembly.

Chair Assembly Steps

Step 1: Attach Seat to Back

Connects the seat to the back using specific bolts, washers, and tightening only halfway.

Step 2: Attach Connector

Attaches the connector piece to the seat assembly with hardware, tightening halfway and then fully.

Step 3: Attach Arms and Base

Connects the arms to the main unit and places the unit onto the base, tightening bolts halfway.

Care and Maintenance Instructions

General Warnings

Advises against liquids, glass cleaners, power tools, direct sunlight, marking, hot objects, rubber placemats, and waxes.

Cleaning Procedure

Details cleaning the furniture with a soft cloth moistened in lukewarm soap and water, then buffing dry.

Homestyles 6661-53 Specifications

General IconGeneral
BrandHomestyles
Model6661-53
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals