Homestyles 5523-61 - User Manual

Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
5523-61
Buffet
IMPORTANT
Cam Lock Screw
24 pcs. (+2 extra)
Magnet
2 pcs.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Cam Lock
24 pcs. (+6 extra)
Adjustable Pin
16 pcs. (+1 extra)
M4x25
Machine Screw
6 pcs.
Handle
2 pcs.
Knob
2 pcs.
M3x16
Wood Screw
12 pcs. (+1 extra)
M3x25
Wood Screw (long)
16 pcs. (+1 extra)
M3x15
Wood Screw (short)
16 pcs. (+1 extra)
A.
Top
1 pc.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
I.
Base
1 pc.
J.
Shelf
4 pcs.
K.
Door
1 pc.
L.
Door
1 pc.
M.
Drawer
2 pcs.
G.
Stretcher
2 pcs.
D.
Middle Panel
1 pc.
E.
Back Panel
3 pcs.
F.
Upright
2 pcs.
H.
Front Rail
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
Home Styles Customer Service: www.homestylesfurniture.com,
servicedesk@homestylesfurniture.com,
888-680-7460, 877-831-0319

Summary

Buffet Part List

Buffet Hardware List

Buffet Assembly Steps

Step 1: Insert Cam Lock Screws

Insert Cam Lock Screws into pre-drilled holes in Top, Side Panels, and Base, then tighten.

Step 2: Attach Stretcher and Uprights

Attach Stretcher to Side Panel with Cam Lock, attach Uprights, slide Back Panels, attach Stretcher to unit.

Buffet Assembly Steps

Step 3: Attach Magnets and Panels

Attach Magnets to Front Rail with screws, then attach Middle Panel, Front Rail, and Side Panel with Cam Locks.

Step 4: Attach Base and Top

Attach Base to unit with Cam Locks, then attach Top to unit with Cam Locks.

Buffet Drawer Assembly

Step 5: Assemble Drawer Box

Attach Drawer Front and Back to Drawer Sides with long wood screws.

Step 6: Insert Drawer Bottom

Slide Drawer Bottom into groove and attach with short wood screws.

Step 7: Attach Drawer Handle

Attach Handle to the drawer front using machine screws.

Buffet Final Assembly

Step 8: Install Drawers, Shelves, Doors, and Knobs

Insert adjustable pins, slide in drawers/shelves, attach doors, and secure knobs with machine screws.

Buffet Structural Tightening

Step 9: Tighten Cam Locks and Screws

Insert and tighten Cam Locks, then insert and tighten Wood Screws into pre-drilled holes.

Buffet Anti-Tip Installation

Step 10: Install Tipover Restraint

Secure bracket to wall and unit, then slide restraint through both brackets and tighten.

Buffet Care Instructions

General Usage Warnings

Avoid liquids, direct sunlight, writing on surface, hot objects, rubber placemats, and commercial polishes.

Cleaning Instructions

Clean with a soft cloth moistened in lukewarm soap and water, then buff with a dry clean cloth.

Homestyles 5523-61 Specifications

General

Brand	Homestyles
Model	5523-61
Category	Indoor Furnishing
Language	English