HomEvap Direct - 2 Delivery; Scope of Supply

To Next Page

To Previous Page

Section 2 – Delivery

Check the packaging on receipt and before opening for visible damage. Damage must be reported to HomEvap in

writing within 48 hours after delivery.

2.1 Scope of supply

The Direct consists of:

2 EPP housings fitted with 2 round connections of R200 mm.

The following components have been fitted in/on the HomEvap housing

humidifier:

• One fibreglass (1) absorbent matrix cassette with LegioSafe water filter

• One (1) PTC electric heating element

• One (1) cord with connection adapter for SHC80 sensor (L=1m)

• One (1) water supply hose black(L=1m; Ø=4mm; adapter ¾” outside)

• One (1) cord with coupling for cord with mains plug (L=1m)

• One (1) cord fitted with a pt1000 temperature sensor T3 (L=2m)

• One (1) cord for connecting the humidifier with the basic cooler

Fan:

• One ventilator

• One (1) cord for connecting the cooler with the humidifier

• One (1) water supply hose black(L=1m; Ø=4mm)

Supplied separately are:

• One (1) combined humidity-temperature sensor (SHC80)

• One (1) cord with coupling for cord with mains plug (230VAC; L=1m)

• One (1) splitter to connect the main plug with the two cords

• One (1) controller