Homewerks SmartVent 7146-80-MS User Manual

11
HomewerksWW.com
LED WALL SWITCH OPERATION
1. LED Light: Press for ON/OFF.
2. Dimmer: Press multiple times to adjust brightness.
1 2
3. Night Light: Press for ON/OFF
4. Humidity Sensor: Press for ON/OFF.
3
4
5. Fan: Press for ON/OFF
5 6
6. Motion Sensor: Press for ON/OFF
7. Main Power Switch: Press for ON/OFF
7
NOTE: Icon is illuminated when the feature is on.
CARE AND CLEANING
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing
the fuse from the fuse box.
• See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water more than 140°F.
1
A
B
2
A
3
A
BEFORE CLEANING
WARNING: RISK OF ELECTRIC SHOCK! Ensure the
electricity is shut off. Either remove the fuse or turn off
the circuit breaker before cleaning.
1. Remove the grille (B) by squeezing the mounting springs and
pulling the grille (B) down from the fan housing (A). Wipe grille
with a damp cloth.
2. Remove dust and dirt from the fan housing (A) with a vacuum
cleaner.
3. Wipe the fan housing (A) with a damp cloth and wipe dry.

Homewerks SmartVent 7146-80-MS Specifications

General

Brand	Homewerks
Model	SmartVent 7146-80-MS
Category	Fan
Language	English