－10－
●
The alarm will return to the original setting automatically
after 10 seconds of inactivity
●
The alarm will repeat for 30 minutes if no button is pressed.
After that, press the alarm switch to reactivate the alarm
for the following day
8.9 Alarm Clock Memory:
●
The last alarm time set is stored in the C12’s memory for
easy activation
9. Playing Music
9.1 Play Music via Bluetooth:
●
To sync with a Bluetooth device, rotate ③ until the
Bluetooth icon is selected. Go to your mobile device’s
Bluetooth settings and search for “C12” to sync. Once
synced, an audible alert will sound. The Bluetooth icon will
light up whilst connected and flash when disconnected.
This unit can only be paired with one device at a time
To Next Page
Loading...
