Why is the oil pressure warning system coming on in my HONDA marine BF115J Outboard Motor?
The oil pressure warning system in your HONDA marine Outboard Motor might activate for a couple of reasons. It could be due to a shortage of engine oil; in that case, add engine oil to the specified level. Alternatively, the issue might be that improper engine oil is being used, so you should change the engine oil.
What to do if the overheat warning system comes on in my HONDA marine Outboard Motor?
If the overheat warning system activates on your HONDA marine Outboard Motor, it could be due to several reasons. First, try cleaning the cooling water intake port, as it might be clogged. Another potential cause is an improper spark plug heat range, in which case you should replace the spark plug. For other potential issues like a faulty water pump, clogged thermostat, or exhaust gas in the cooling system, it is recommended to consult an authorized Honda outboard motor dealer.
How to troubleshoot the ACG warning system on my HONDA marine BF115J Outboard Motor?
If the ACG warning system activates on your HONDA marine Outboard Motor, it may be due to the battery voltage being too high or too low, in which case you should check the battery. If the issue persists, it could be a faulty ACG, and it is recommended to consult with an authorized Honda outboard motor dealer.
What to do if the water separator warning buzzer sounds on my HONDA marine Outboard Motor?
If the water separator warning buzzer sounds on your HONDA marine Outboard Motor, it indicates water accumulation in the water separator. Clean the water separator and check the fuel tank and fuel line for water accumulation. If the buzzer sounds again after these steps, consult with an authorized Honda outboard motor dealer.
General| Brand | HONDA marine |
|---|---|
| Model | BF115J |
| Category | Outboard Motor |
| Language | English |
To Next Page
