Honda 2005 CRF450R - Service Procedures

Servicing Your Honda 29
Seat Removal
Refer to Safety Precautions on page 19.
Removal
1. Remove the seat mounting bolts (1).
2. Remove the seat (2) by sliding it backward.
Installation
1. Install the seat while aligning the seat front
prong (3) with the seat bracket (4) and seat
rear prong (5) with the frame (6).
2. Install and tighten the seat mounting bolts to
the specified torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
(2)
(1)
(4)
(3)
(5)
(6)
(1) seat mounting bolts (2) seat
(3) seat front prong
(4) seat bracket
(5) seat rear prong
(6) frame
024-053.qxd06.5.1111:58ページ29