(1) (2)
(3)
(3)
(4)
(6)
(5) (5)
(6) rear seat cover
(7) stopper holes
(8) pins
(3) washers
(4) grab rails
(5) grab rail covers
(1) caps
(2) grab rail
mounting bolts
(2)
(4)
(8)
(7)
(2) (1)
91
Servicing Your Honda
Rear Seat Cover
Saf ety PrecautionsRefer to on page .
Installation
The grab rails must be returned to position
when riding in tandem.
Remove the seat (page 90 ).
Remove the caps (1), grab rail mounting
bolts (2) and washers (3).
Remove the grab rails (4).
Install the grab rail covers (5).
Turn the seat over.
Install the rear seat cover (6) to the seat.
Fit the stopper holes (7) of rear seat
cover securely into the pins (8).
Install the seat (page 90 ).
1.
2.
3.
5.
4.
6.
7.
8.
74
06/09/06 11:53:33 31MCW650_100
To Next Page
Loading...
