(4)
(5)
(6)
(4) front prongs
(5) front stays
(6) rear prongs
(7) rear stays
(7)
(1) ignition key
(2) seat lock
(3) seat
(3)
(2)
(1)
90
Seat Removal
Servicing Your Honda
Saf ety PrecautionsRefer to on page . Removal
Insert the ignition key ( ) into the seat
lock ( ).
Turn it clockwise and pull up on the
rear of the seat ( ).
Installation
Insert the front prongs ( ) into the front
stays ( ) and the rear prongs ( ) into
the rear stays ( ) on the frame.
Push forward and then down on the rear
of the seat.
Be sure to securely lock the seat after
reinstalling it.
The seat must be removed for battery,
main fuse and rear brake reservoir
maintenance, to use the helmet holder, to
access the tool kit and owner’s manual, or
to lift the fuel tank.
Pull the seat back and up.
1.
2.
2.
3.
1.
6
74
4
7
5
1
2
3
06/09/06 11:53:24 31MCW650_099
To Next Page
Loading...
