Honda 2012 NC700D - Engine will Not Start (HISS Indicator Stays On)

86
Troubleshooting
Engine Will Not Start (HISS indicator stays on)
❙
Starter Motor Operates But Engine
Does Not Start
Check the following items:
● Check the correct engine starting
sequence 2 P. 27
● Check that there is petrol in the fuel tank
● Check if the PGM-FI malfunction indicator
lamp (MIL) is on
u If the indicator light is on, contact your
dealer as soon as possible.
● Check if the HISS indicator stays on
u Turn the ignition switch to the OFF
position and remove the key. Reinsert
the key and turn the ignition switch to
the ON position. If the indicator still
stays on, check the following:
Check if there is no another HISS key
(including spare key) close to the
ignition switch.
Check if there are no any metallic seals
or stickers on the key.
If the HISS indicator still stays on, have
your motorcycle inspected by your
dealer.
❙
Starter Motor Does Not Operate
Check the following items:
● Make sure engine stop switch is RUN
position
2 P. 24
● Check for a blown fuse 2 P. 106
● Check for a loose battery connection or
battery terminal corrosion
2 P. 49
● Check the condition of the battery
2 P. 100
If the problem continues, have your
motorcycle inspected by your dealer.
12 NC700D (NM-2)(TH)-32MGS8000.book 86 ページ ２０１２年４月１８日 水曜日 午後９時３分