Honda CB160 - SPECIFICATIONS

II SPECIFICATIONS
MODEL
ENGINE
Fuel
Cooling system and cycles
Number of cylinders and mounting
angle
Valves
Combustion
chamber
Cylinder capacity
Bore X Stroke
Compression ratio
Compression
Max. output
Max. torque
Min. fuel consumption ot full !acid
Starling
Ignition
Spark timing
Spark coil
Model
Manufacturer
Spark plug
Type
Manufacturer
Carburetor
Type and number
Manufacturer
Air cleaner
Type
Manufacturer
Fuel tank capacity
Lubrication system
Type of oil pump
Type of oil filter
Lubricat'ng oil
capacity
Battery
Model and number
Voltage/capacity
CB 125
Gasoline (petroll
Air-cooled. 4-stroke
2 cylinders, parallel 30° up from
horizontal
Overhead type
Semi-spherical
0.1246 lit (7.6 cu inl
44 X 41 mm (1.73 X 1.61 in)
9.0
10 kg/sq cm (141.9 psi!
15 hp/I 0500 rpm
1.07 mkg (7.7 ft lbl/9200 rpm
250 gr (8.8 ozl/hp/h
E
1
ectric motor and kick systems
combined
Battery spark
5° to 45° before top dead center
R 208 29700-097 CM 12
Kokusan Denki, Nihon Denso, Hitachi
Seisokusho
D-8 H
Nihon Tokushu Togyo
Piston valve type, 2 each
TK Kikaki !K.K.1 Keihin Se:ki (K.K.1
Filter paper
Tokyo Roki !K. K.I
10.5 lit 12.8 US gal, 2.3 Imp gall
Pump and splash system combined
Plunger
Wire mesh and centrifugal system
combined
1.0 lit (.27 US gal .22 Imp gall
MBW
3-12C, I each
12 V 9 AH
CB 160
Air-cooled. 4-stroke
2 cylinders, parallel 30° up from
horizontal
Overhead type
Semi-spherical
0.161 lit 19.84 cu inl
50X41 mm (1.97X 1.61 in)
8.5
10 kg/sq cm (I 41.9 psi)
16.5 hp/1 0,000 rpm
1.24 (9 ft. lb 1/8 500 rpm
250 gr (8.8 ozl/hp/h
Electric motor and kick systems combined
Battery spark
5° to 45° before top dead center
R 208 29700-097 CM 12
Kokusan Denki, Nihon Denso, Hitach!
Seisakusho
D-8 H
Nihon Tokushu
Togyo
Piston valve type, 2 each
TK Kikaki (K. K.l Keihin Seiki IK. K.l
Filter paper
Tokyo Roki IK. K.l
10.5 lit (2.8 US gal, 2.3 Imp gall
Pump
and splash system combined
Plunger
Wire mesh and centrifugal system
combined
1.0 lit t.27 LIS gal .22 Imp gal
MBW 3-l2C, 1 each
12 V 9 AH