Honda CB160 - Frame Body

4. 5 FRAME BODY
3. Fit the front and rear cushions to the frame body.
The front cushiO!J should be inserted by pushing the
fuel tank from
the rear. The nut of the rear brace
should be tightened for securing the cushion. (Refer
to Fig.
4. 35)
4. Fit the fuel lines A and B and the reserve line
and
secure them by the clips.
5.
Fit the seat and tighten it with the seat mounting
bolt.
4. 5 Frame body
A. Construction
of frame body
As the frame supports the engine and contacts the
ground through
the front and rear wheels, it is all-
important.
In addition, it is an important element in
determining the design. The main function of the
frame
is maintaining strength of the body for sup-
porting the er19ine, passengers, and carrier load.
Another function allows
for absorbing shocks through
the wheels. Sufficient rigidity
is required for steering
performance and
lightness weight is desired for run-
ning performance.
Fig. 4. 35 Pushing fuel tank from the rear side
MAIN PIPE
STEERING HEAD PIPE
63