Continued
509
uuWhen DrivinguRoad Departure Mitigation (RDM) System
Press the RDM button to turn the system on
and off.
u The indicator in the button comes on and
the message appears on the driver
information interface when the system is
on.
The system may not properly detect lane markings and the position of your vehicle
under certain conditions. Some examples of these conditions are listed below.
■
Environmental conditions
• Driving in bad weather (rain, fog, snow, etc.).
• Sudden changes between light and dark, such as an entrance or exit of a tunnel.
• There is little contrast between lane lines and the roadway surface.
• Driving into low sunlight (e.g., at dawn or dusk).
• Strong light is reflected onto the roadway.
• Driving in the shadows of trees, buildings, etc.
• Shadows of adjacent objects are parallel to lane markings.
• Roadway objects or structures are misinterpreted as lane markers.
• Reflections on the interior of the front windshield.
■
RDM On and Off
1RDM On and Off
When you have selected Warning Only from the
customized options using the driver information
interface
*
or the audio/information screen
*
, the
system does not operate the steering wheel and
braking.
2 Customized Features P. 127, 366
The indicators for the Adaptive Cruise Control (ACC)
with Low Speed Follow, Road Departure Mitigation
(RDM), Vehicle Stability Assist
TM
(VSA®) system,
Vehicle Stability Assist
TM
(VSA®) OFF, low tire
pressure/TPMS, Collision Mitigation Braking System
TM
(CMBS
TM
), and Parking Brake and Brake System
(Amber) may come on along with a message in the
Driver Information Interface after reconnecting the
battery. Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
■
RDM Conditions and Limitations
* Not available on all models
21 CR-V PET ELP_MAP_HMIN_HCM-31TLA6400.book 509 ページ ２０２０年９月２日 水曜日 午後１時３５分
To Next Page
Loading...
