37
Tread Wear
You must periodically confirm the tread
wear depth.
Replace tyres before tread depth (1) at the
centre of the tyre reaches the following
limit:
Tube Repair and Replacement
If a tube is punctured or damaged, you
should replace it as soon as possible. A tube
that is repaired may not have the same
reliability as a new one, and it may fail while
you are riding.
If you need to make a temporary repair by
patching a tube or using an aerosol sealant,
ride cautiously at reduced speed and have
the tube replaced before you ride again.
Any time a tube is replaced, the tyre should
be carefully inspected as described on page
36.
Minimum tread depth
Front: 3.0 mm (0.12 in)
Rear: 3.0 mm (0.12 in)
(1) Tread depth
37K28B31.book Page 37 Monday, July 26, 2021 6:11 PM
To Next Page
Loading...
