82
WHEEL REMOVAL
Refer to the Safety Precautions on page 55.
Front Wheel Removal
1. Raise the front wheel off the ground by
placing a support block under the
engine.
2. Remove the axle nut (1).
3. Remove the front axle shaft (2), wheel,
and side collars.
Do not depress the brake lever when the
wheel is off the motorcycle. The caliper
pistons will be forced out of the cylinders
with subsequent loss of brake fluid. If this
occurs, servicing of the brake system will
be necessary. See your dealer for this
service.
(1) Axle nut
(2) Front axle shaft
37K28B31.book Page 82 Monday, July 26, 2021 6:11 PM
To Next Page
Loading...
