Honda CRF125FB 2021 User Manual

81
WHEEL RIMS AND SPOKES
Refer to the Safety Precautions on page 55.
1. Inspect the wheel rims (1) and spokes
(2) for damage.
2. Tighten any loose spokes and rim lock
(3).
3. Check wheel rim runout. If runout is
noticeable, see your dealer for
inspection.
Maintenance of spoke tension and wheel
trueness are critical to safe motorcycle
operation. During the first 150 km (100
miles), spokes will loosen more rapidly due
to initial seating of parts. Excessively loose
spokes may result in high speed instability
and possible loss of control.
(1) Wheel rim
(2) Spoke
(3) Rim lock
(3)
(1)
(2)
37K28B31.book Page 81 Monday, July 26, 2021 6:11 PM

Honda CRF125FB 2021 Specifications

General

Engine Type	124cc air-cooled single-cylinder four-stroke
Bore and Stroke	52.4mm x 57.9mm
Compression Ratio	9.0:1
Ignition	CDI
Transmission	Four-speed
Final Drive	Chain
Rear Brake	Drum
Front Tire	70/100-19
Rear Tire	90/100-16
Wheelbase	49.4 inches
Seat Height	30.9 inches
Fuel Capacity	1.0 gallon
Valve Train	SOHC; two-valve
Starter	Electric
Front Suspension	31mm telescopic fork; 5.9 inches of travel
Rear Suspension	5.9 inches of travel
Front Brake	220mm hydraulic disc