−
(2)
LEFT SIDE
(1)
(3)
(4)
(5)
(3) air cleaner
(4) projection (air cleaner housing cover)
(5) projection (air cleaner housing)
(1) attaching screws
(2) air cleaner housing cover
68
Cleaning
Air Cleaner
Servicing Your Honda
Remove the two attaching screws ( ) and
the air cleaner housing cover ( ).
Remove the air cleaner ( ).
Gently wash the air cleaner in clean, non-
flammable (high flash point) solvent such as
kerosene not gasoline. After cleaning,
gently squeeze out the remaining solvent.
Avoid twisting or wringing the air cleaner.
This can tear the foam.
Inspect for tears or cracks in the foam or
seams of the air cleaner. Replace the air
cleaner if it is damaged.
Allow the air cleaner to dry thoroughly
before applying oil. A wet air cleaner will
not fully absorb the oil.
4.
5.
1.
2.
3.
1
2
3
０８／０３／１９ ０９：５９：１９ ３１ＧＥＬ６９０ ００７７
To Next Page
Loading...
