(1)
(2)
LEFT SIDE
(3)
(4)
(4)
(1) left crankcase cover
(2) bolts A
(3) bolt B
(4) adjusting hole caps
75
Valve Clearance
Servicing Your Honda
Safety Precautions
Excessive valve clearance will cause noise and
eventual engine damage. Little or no clearance
will prevent the valve from closing and cause
valve damage and power loss. Check valve
clearance when the engine is cold at the
intervals specified in the Maintenance Schedule.
The checking or adjusting of the clearance
should be performed while the engine is cold.
The clearance will change as engine
temperature rises.
Refer to on page .
(cont’d)
Remove the left crankcase cover ( ) by
removing the bolts A ( ) and bolt B ( ).
Remove the adjusting hole caps ( ).
1.
2.
45
1
3
4
2
０８／０３／１９ １０：００：１４ ３１ＧＥＬ６９０ ００８４
To Next Page
Loading...
