Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket untilit bottoms.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Testthelightstomakesurethe
new bulb is working.
(Driver’s side)
Install the front end of the air
intake duct.
Place a cloth between the trim of
the lens and the body, at the top of
the lens. Removethe front side
marker light assembly by carefully
prying on the trim of the lens with
a small flat-tipped screwdriver.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket untilit bottoms.
1.
3.
4.
5.
2.
3.
6.
Replacing a Front Side Marker
Light Bulb
Lights
Maintenance
168
０３／１０／２２ １８：２３：５６ ３１ＳＣＶ６１０ ０１７３
To Next Page