OPERATION
40
AC Applications
Before connecting an appliance or power cord to the generator:
• Make sure that it is in good working order. A faulty appliance or power cord
can create a potential for electrical shock.
• If an appliance begins to operate abnormally, becomes sluggish, or stops
suddenly, turn it off immediately. Disconnect the appliance, and determine
whether the problem is the appliance or the rated load capacity of the
generator has been exceeded.
Most appliance motors require more than their rated wattage for startup.
Make sure the electrical rating of the tool or appliance does not exceed the
maximum power rating of the generator.
Maximum power is:
3.0 kVA
For continuous operation, do not exceed the rated power.
Rated power is:
2.8 kVA
In either case, the total power requirements (VA) of all appliances connected
must be considered. Appliance and power tool manufacturers usually list rating
information near the model number or serial number.
Substantial overloading that continuously lights the red overload alarm may
damage the generator. Marginal overloading that temporarily lights the red
overload alarm may shorten the service life of the generator.
31ZS96101.book 40 ページ ２０２０年２月２６日 水曜日 午後２時３３分
To Next Page
Loading...
Need help?
General
