Name: Honda EU3000is
Brand: Honda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SERVICING YOUR GENERATOR

SPARK PLUG SERVICE

In order to service the spark plug, you will need a spark plug wrench

(commercially available).

Required spark plug: BPR6ES (NGK)

W20EPR-U (DENSO)

To ensure proper engine operation, the spark plug must be properly gapped

and free of deposits.

An incorrect spark plug can cause engine damage.

If the engine is hot, allow it to cool before servicing the spark plug.

1. Use a screwdriver to loosen the latch and open the left side

maintenance cover.

2. Loosen the cover screw and remove the spark plug inspection cover.

3. Disconnect the spark plug cap, and remove any dirt from around the spark

plug area.

4. Remove the spark plug with a spark plug wrench.

SPARK PLUG

INSPECTION COVER

SPARK PLUG CAP

COVER SCREW

SPARK PLUG WRENCH

31ZS96101.book 53 ページ２０２０年２月２６日　水曜日　午後２時３３分

Questions and Answers:

Need help?

Do you have a question about the Honda EU3000is and is the answer not in the manual?

Honda EU3000is Specifications

General