Honda F300 - Tines and Fasteners Check

42
SERVICING YOUR TILLER
TINES AND FASTENERS CHECK
Use Honda Genuine replacement tines or their equivalent.
Wear heavy gloves to protect your hands.
1. Check for damage, bent, or loose tines. If abnormality is found,
tighten or replace the damaged part (see page 43).
2. Check the tine setting bolts and nuts for looseness, tighten if
necessary.
3. Check for damaged or missing retainers and lock pins, and replace
with new ones if necessary.
LOCK PIN
RETAINER
BOLT/NUT
TINE
4MV488000.book 42 ページ ２０１６年３月２日 水曜日 午後１２時３６分