Honda F300 - Tine Replacement

43
SERVICING YOUR TILLER
TINE REPLACEMENT
Remove the rotor from the axle before replacing the tine (see page 21).
Use Honda Genuine replacement tines or their equivalent.
Wear heavy gloves to protect your hands.
Install the tines properly.
Incorrect arrangement of the tines or installing the tines in the wrong
direction will cause vibration and hinder proper tilling.
Two tines (A and B) are provided. A tine has engraved A mark on its
face and B tine has B mark.
Nut and bolt positions
For all rotary tines:
Tighten the bolts from inside out.
MAIN ROTOR
(Right side)
A TINE
MAIN ROTOR
(Left side)
B TINE
BOLTS
NUTS
A TINE
B TINE
NUTS
BOLTS
EXTENSION ROTOR
(Right side)
B TINE
EXTENSION ROTOR
(Left side)
BOLTS
NUTS
BOLTS
NUTS
A TINE
4MV488000.book 43 ページ ２０１６年３月２日 水曜日 午後１２時３６分