Need help?Do you have a question about the Honda FC600 and is the answer not in the manual?
General safety advice and explanation of safety symbols.
Crucial safety information for operating the tiller safely.
Key responsibilities of the tiller operator for safe use.
Explains the dangers of carbon monoxide from exhaust.
Precautions regarding hot exhaust and flammable materials.
Safe procedures for refueling the tiller with gasoline.
Warnings and precautions about the dangers of tines.
Importance of clearing the area before tilling to prevent injury.
Emphasizes the importance of keeping safety guards and shields installed.
Recommends wearing appropriate protective clothing for safety.
Instruction to always turn off the engine when leaving the tiller.
Safety guidelines and limitations for operating the tiller on slopes.
Advice on operating conditions, such as lighting.
Identifies the location and purpose of safety labels on the tiller.
Diagram showing the location of various tiller controls and components.
Explains the function and operation of the fuel valve.
Describes the choke lever's role in starting the engine.
Details the function of the engine switch for starting/stopping.
How to use the starter grip to crank the engine.
Controls engine speed and tine rotation speed.
How to adjust the handlebar height for operator comfort.
Engages and disengages the transmission driving the tines.
Controls tilling depth and compensates for soil hardness.
Used for moving the tiller; must be raised before tilling.
Used for attaching the drag bar or other attachments.
Emphasizes preparation and knowledge for safe operation.
Importance of reading the manual and knowing controls.
Importance of pre-operation checks for safety and compliance.
Steps to check engine oil, air filter, and fuel level.
Step to check the transmission oil level.
General safety precautions before operating the tiller.
Step-by-step guide to starting the tiller's engine.
Procedure for adjusting the handlebar height.
How the clutch lever engages and disengages power.
How to adjust the drag bar for tilling depth.
How to raise or lower the front wheel for transport/tilling.
Procedure for safely stopping the tiller's engine.
Explains why regular maintenance is crucial for performance and safety.
Safety precautions to follow during maintenance and repair.
A table outlining the recommended maintenance intervals and tasks.
Instructions for safely refueling the tiller.
Guidance on the type of gasoline to use for the tiller.
Procedure for checking the engine oil level.
Step-by-step instructions for changing the engine oil.
Recommendations for engine oil viscosity and API service category.
How to check the transmission oil level.
How to inspect the air filter elements for dirt and damage.
Instructions on how to clean the air filter elements.
Steps for inspecting, gapping, and replacing the spark plug.
How to adjust the clutch cable for proper free play.
How to adjust the throttle cable for correct free play.
Procedure for adjusting the drive belt tension.
Steps for cleaning the fuel sediment cup and filter.
Maintenance for the spark arrester, if equipped.
Steps for preparing the tiller for storage.
Instructions for cleaning the tiller before storage.
Specific instructions for cleaning the engine.
Specific instructions for cleaning the tiller body.
Information about fuel deterioration and storage.
How to use gasoline stabilizer for long-term storage.
Procedure for draining the fuel system for storage.
Steps for preparing the engine with oil for storage.
Safety and environmental considerations for storage areas.
Steps for preparing the tiller after removal from storage.
Safety precautions before loading the tiller onto a vehicle.
Instructions for safely loading and unloading the tiller.
Troubleshooting for engine issues.
Lists possible causes and corrections for engine not starting.
Lists possible causes and corrections for engine losing power.
Troubleshooting for tiller performance issues.
Lists causes and corrections for poor tilling performance.
Shows where to find the engine and frame serial numbers.
Information on modifying the carburetor for high altitude use.
Details about emissions, regulations, and tampering.
Symptoms indicating potential emission control problems.
Recommendations on using genuine Honda parts for emission systems.
Refers to the maintenance schedule for emission system upkeep.
Explanation of the Air Index system for California models.
Technical specifications for the FC600 tiller model.
How to find an authorized Honda servicing dealer.
Information on shop manuals, parts catalogs, and accessories.
How to contact Honda for customer service and support.
Quick reference for fuel type and octane rating.
Quick reference for engine oil type and capacity.
Quick reference for recommended spark plug types.
Quick reference for pre-use and scheduled maintenance checks.
To Next Page
General
