Honda FC600 - BEFORE OPERATION; ARE YOU READY TO GET STARTED?; Knowledge; IS YOUR TILLER READY TO GO?

14
HONDA FC600 (E) xxxxxxxxxxxx -14-
BEFORE OPERATION
ARE YOU READY TO GET STARTED?
Your safety is your responsibility. A little time spent in preparation will
significantly reduce your risk of injury.
Knowledge
Read and understand this manual. Know what the controls do and how to
operate them.
Familiarize yourself with the tiller and its operation before you begin using it.
Know how to quickly shut off the tiller in case of an emergency.
IS YOUR TILLER READY TO GO?
For your safety, to ensure compliance with environmental regulations, and
to maximize the service life of your equipment, it is very important to take a
few moments before you operate the tiller to check its condition. Be sure to
take care of any problem you find, or have your servicing dealer correct it,
before you operate the tiller.
Improperly maintaining this tiller, or
failing to correct a problem before
operation, could cause a
malfunction in which you could be
seriously injured.
Always perform a pre-operation
inspection before each operation,
and correct any problem.
00X31-733-7200_FC600_EN.book 14 ページ ２０１２年４月２０日 金曜日 午後８時５分