50
TAKING CARE OF UNEXPECTED PROBLEMS
HONDA FC600 (E) xxxxxxxxxxxx -50-
TILLER
POOR TILLING QUALITY
Possible Cause Correction
Engine speed is too slow for soil
conditions.
Move the throttle to FAST position
(p. 11).
Tiller is moving too fast for soil
conditions.
Reduce throttle speed (p. 11).
Drag bar adjustment set too high. Lower drag bar adjustment (p. 21).
Tines dull, worn, or damaged. Replace tines if necessary.
Wrong tines installed. Install correct tines.
Tines installed incorrectly. Install tines correctly.
00X31-733-7200_FC600_EN.book 50 ページ ２０１２年４月２０日 金曜日 午後８時５分
To Next Page
Loading...
