31
SERVICING YOUR TILLER
HONDA FC600 (E) xxxxxxxxxxxx -31-
TRANSMISSION OIL LEVEL CHECK
Check the transmission oil level with the tiller on a level surface and the
engine stopped.
1. Remove the transmission oil filler cap. The oil should be level with the
lower edge of the oil filler hole.
2. If the level is low, add the same oil as recommended for the engine (see
page 30) until it reaches the lower edge of the filler hole.
3. Reinstall the oil filler cap securely.
TRANSMISSION
OIL FILLER CAP
OIL FILLER HOLE
UPPER LIMIT
LOWER EDGE OF THE
OIL FILLER HOLE
00X31-733-7200_FC600_EN.book 31 ページ ２０１２年４月２０日 金曜日 午後８時５分
To Next Page
Loading...
