EasyManua.ls Logo

Honda FC600 - FUEL RECOMMENDATIONS

Honda FC600
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
SERVICING YOUR TILLER
HONDA FC600 (E) xxxxxxxxxxxx -27-
FUEL RECOMMENDATIONS
This engine is certified to operate on unleaded gasoline with a pump octane
rating of 86 or higher.
Never use stale or contaminated gasoline or an oil/gasoline mixture.
Avoid getting dirt or water in the fuel tank.
You may use regular unleaded gasoline containing no more than 10%
ethanol (E10) or 5% methanol by volume. In addition, methanol must contain
cosolvents and corrosion inhibitors.
Use of fuels with content of ethanol or methanol greater than shown above
may cause starting and/or performance problems. It may also damage
metal, rubber, and plastic parts of the fuel system.
Engine damage or performance problems that result from using a fuel with
percentages of ethanol or methanol greater than shown above are not
covered under warranty.
If your equipment will be used on an infrequent or intermittent basis, please
refer to the fuel section of the STORAGE chapter (see page 42) for additional
information regarding fuel deterioration.
00X31-733-7200_FC600_EN.book 27 ペー 2012年4月20日 金曜日 午後8時5分

Table of Contents

Related product manuals