45
STORAGE
HONDA FC600 (E) xxxxxxxxxxxx -45-
Engine Oil
1. Change the engine oil (see page 29).
2. Remove the spark plug (see page 34).
3. Pour a teaspoon (5 cc) of clean engine oil into the cylinder.
4. Gently pull the starter grip several times to distribute the oil in the cylinder.
5. Reinstall the spark plug and spark plug cap.
6. Pull the starter grip slowly until you feel resistance and then return the
starter grip gently. This will close the valves so moisture cannot enter the
engine cylinder.
00X31-733-7200_FC600_EN.book 45 ページ ２０１２年４月２０日 金曜日 午後８時５分
To Next Page
Loading...
