30
7.P.T.O. (Power Take Off) operation
A rotary shall not be attached to this tiller.
(If a rotary is attached, such a machine does not conform to the
European standard EN709: 1997+A4: 2009 ‘‘pedestrian-controlled
tractors’’)
The P.T.O. shaft is used for stationary work, hulling, spraying and
moving, etc.
When using the P.T.O. shaft, consult your servicing dealer.
Do not operate the tiller without the P.T.O. cover when the P.T.O. is
not used.
P.T.O. SHAFT
P.T.O. COVER
To Next Page
Loading...
