43
4.Sediment cup cleaning
Gasoline is extremely flammable and is explosive under certain
conditions. Do not smoke or allow flames or sparks in the area.
1.Turn the fuel valve to the OFF position and remove the sediment cup,
O-ring, and filter.
2.Wash the sediment cup in solvent, dry it thoroughly.
3.Place the filter and O-ring in the fuel valve, and install the sediment
cup.
Insert the prong of the filter into the groove of the carburetor body.
Make sure that filter is properly secured.
4.Tighten the sediment cup securely.
5.Turn the fuel valve ON and check for leaks.
FUEL VALVE
SEDIMENT CUP
O-RING
OFF
FILTER
CARBURETOR BODY
(Viewed from the bottom)
FILTER
PRONG
GROOVE
To Next Page
