40
2.Changing transmission oil
1.Place the tiller on a level surface.
2.Remove the oil filler cap and drain bolt to drain.
3.Reinstall the drain bolt. Fill the transmission with same oil as the
engine oil (see page 14) up to the level. Reinstall the oil filler cap.
Oil capacity: 2.20 L (2.32 US qt, 1.94 lmp qt)
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
DRAIN BOLT
OIL FILLER CAP
To Next Page
