3. Place your foot on “STEP” on the mower housing.
4. Pull the starter rope lightly until you feel compres-
sion, then pull briskly.
NOTE:
Do not allow the rope to snap back; return it by hand.
5. After the engine warms up, move the throttle lever
to “HI”.
Squeeze the ROTO-STOP to start the
blade.
(S-XAM TYPE) Move the shift lever to “1”. Engage
the drive clutch/ROTO-STOP and the mower
will move forward. For faster speeds, shift to “2” or
“ 7,
3 .
NOTE:
The throttle lever may be moved anywhere between
“HI” and “LO” to adjust engine speed during opera-
tion.
However the engine may stall if the lever is at “IDLE”
when the ROTO-STOP is engaged.
THROTTLE LEVER, \ /
14
HR21
To Next Page
Loading...
