60
Loading
Never leave the transmission release lever in the RELEASED
position while loading; the snowblower may start suddenly,
resulting in serious injury or accident.
Avoid stopping the snowblower on the ramp. Should the engine
stop, be sure to move the shift lever back to the NEUTRAL before
attempting to restart the engine.
UP
DOWN
REVERSE
1.5 m (4.9 ft)
minimum headroom
Position the loading ramps in line with the track shoes.
Use extreme care not to hit the discharge chute against the hood or
any other parts of the truck.
Use reverse gear to back the snow blower up the ramp.
Lower the discharge chute all the way down by operating the
discharge chute adjust switch.
Squeeze the height adjust lever, and raise the auger to the HIGH
position (P. ).
1.
2.
3.
4.
5.
20
04/11/26 17:11:11 3C768600_064
To Next Page
Loading...
