Need help?Do you have a question about the Honda K20C1 and is the answer not in the manual?
General| Displacement | 1996 cc |
|---|---|
| Compression Ratio | 9.8:1 |
| Fuel System | Direct injection |
| Redline | 7000 rpm |
| Engine Type | Inline 4-cylinder |
| Bore x Stroke | 86 mm x 85.9 mm |
| Maximum Power | 306 hp at 6500 rpm |
| Maximum Torque | 295 lb-ft @ 2500-4500 rpm |
| Turbocharger | Single-scroll |
| Valvetrain | DOHC, VTEC |
Steps for starting an engine with no lubricants, including priming the oil system and checking oil pressure.
Steps for starting an engine that already contains oil, focusing on oil level confirmation and pressure checks.
Recommended warm-up procedure for the engine before operating at race pace to prevent component damage.
Procedure for shutting down the engine after hot laps to equalize turbo temperature and prevent damage.
Details dashboard warning light triggers, including temperature, pressure, and voltage, with recommended actions.
To Next Page
